Natural stone is the ideal product to achieve a touch of quality and elegance. In the same way, these characteristics are increasingly associated with innovation and current affairs; Because many architects, designers or companies value these stone properties.
This durable material features various patterns from which to create the most attractive and interesting designs in each case. Likewise, the possibility to find different finishes in natural stone allows us to choose the most suitable material for each case or to distinguish between interior and exterior according to the style we prefer.
cutting mode
Prepare the wall correctly. Always start laying the pieces from the corners (if any) and from the bottom to the top. In order to correctly place the forms, it is advisable to use a construction level. Also avoid straight vertical joints and alternating cuts and sizes. Apply a layer of mortar to the wall (don’t apply it to surfaces that are too large to keep it from drying out before applying the pieces). In this way we achieve joint drying tensions between the wall and the stone.
Cover the entire back of each piece with mortar and tap the wall, bottom to top, until the piece is resting. Excess mortar should always come out from the top to avoid staining. When removing excess bonding material, avoid staining the surface of the parts. A stone accidentally stained with mortar should be allowed to dry to crumble and lightly on the outside with a plastic bristle brush.
cleaning
To clean the composition and before the mortar dries, gently brush it with a brush or plastic brush (never wire) to remove excess material and clean the face of the stone. Never use a damp or wet brush. It is recommended to carry out maintenance every two years, so it is necessary to use a sealant.
How is natural stone look wall cladding made?
Natural stone look wall cladding panels provide the look of natural stone, as the name suggests, with its elegant appearance and structure. These coatings protect you from the defects of natural stones. Natural stone cladding is a cladding product that is often preferred indoors and outdoors. The natural stone look wall cladding panels can be easily disassembled from the application site and reassembled just as easily. The surface on which the panels will be laid must be thoroughly cleaned. You can also assemble these panels individually using sharpened Styrofoam or Calchem adhesives.
https://youtu.be/ErUvO_ziTNs
Stone look exterior cladding
Stone-like wall covering panels applied to the exterior of the space do not weigh down the wall. Provides heat and sound insulation. Although its appearance is similar to natural stone, it is softer and lighter due to its structure. It provides cheaper and easier application by copying only the look of natural stone. Natural stone veneer can be made with raw materials known as polyester, fiberglass, resin or natural stone powder. Unlike natural stone, the most important advantage of stone-like wall covering panels is that they are suitable for special designs. In today’s technology, stone-like panels can be produced with many different properties.
natural stone wall covering prices
We continue our article in which we provide information for those who are wondering how to make natural-looking coatings with stone and whether their prices are reasonable. Natural stones have been used in architectural structures from the past to the present. We constantly come across natural stones in old buildings. Stone-like cladding panels are cheaper and more practical than natural stone. Stone-like wall panels are priced at 30-80 TL on average, based on the standard size of 30 x 120 x 2 cm. These prices may vary depending on special designs.
Stone fiber wall cladding panels
The fiberglass wall panels have a stone look and are easy to clean features. Stone fiber wall panels models can be applied in every area of your home, including the kitchen and bathroom. The most attractive feature of fiberboard is that it has a three-dimensional appearance. Thanks to its flexibility and features, it can also be applied to both rough and curved surfaces. They can be simply painted over and replaced during use.
Exterior stone cladding models for villa
Particularly preferred for outdoor use in villas and large buildings, stone coating application is very popular today. The advantages of the exterior stone cladding of the villa, which is applied by means of quality prepared materials and natural elements, are many. The fact that the content does not contain additives is the feature that attracts consumers the most. For this reason, it does not have any negative effects on the life of living organisms and is very easy to apply. The most widely used and cost-effective model is the applied polyurethane coating.
Polyurethane sheets are the most preferred application and can be used on all surfaces. It is applied to plaster and saves you packaging costs. Polyurethane cladding provides heat and sound insulation. Another important advantage of these coatings is their high heat resistance. Thanks to this feature, it protects you from normal fires and provides a safe environment. Another model is styrofoam coating. The disadvantages of this method are much higher than that of polyurethane coating. The thermal and acoustic insulation performance is not impressive. It has a more durable and brittle texture compared to a polyurethane layer.
Why do I choose natural stone for my exterior wall facade?
Years ago, stone cladding seemed to be available only in vacation homes.
But nowadays, due to the media push to see it everywhere, the use of decorative stone as a formidable aesthetic resource is increasingly being incorporated into the world of construction.
An opportunity that the market did not miss and was able to respond quickly and effectively to the increasing demand, offering a variety at a good price.
Natural stone today can be found much more easily than before, because, as already mentioned, it is in much greater demand.
The following are the reasons for choosing natural stone as an exterior wall facade:
– High durability. Natural stone is very strong and durable. Its appearance has been preserved over the years.
– It can be reused. The useful life of these materials does not have to expire with the life of the building. It can be recycled and reused.
– She has thermal inactivity. This makes this material an ideal thermal insulator that allows significant savings on heating and cooling.
– Acoustic insulation. Due to its large mass, natural stone becomes an ideal sound insulator that will not let in any external sound.
– It’s versatile. This material offers a variety of textures and colors. Which makes it an ideal material for any environment and space.
– It is fireproof. Apart from providing great fire safety, it is a great source of heat inside the home.
Step by step for laying natural stone on the facade of the outer wall
Next, we will give you all the steps to follow on how to put natural stone on an exterior facade.
1. Eliminate wall irregularities
Apply a layer of dry mortar to the original wall to remove any irregularities that may be present in the wall.
Before it dries, it is advisable to spread a mesh of mortar over it to achieve better resistance to cracks and cracks.
2. Network coverage
Spread a second layer of mortar with a notched trowel. The shape that the serrated ruler gives the stone, along with the sticky cement, will help it get a better gripping surface. Let it dry for 24 hours before continuing.
3. Remove traces of dust and sand
With plenty of water and a brush, we will clean the natural stone before sticking it to the wall. In this way we will remove dust and sand residues that prevent a tight grip on the wall.
4. Put the plumb
This is the best way for all natural stone pieces to be on the same level.
5. Apply the adhesive tape to the stone piece
To place a piece of stone on the wall, it is important not to apply the adhesive tape directly to the wall.
If this is not the case, then it is necessary to apply it to the same piece of stone, and slightly moisten the wall on which we will put it on for better adhesion.
6. Put the stone with cement glue on the wall
To do this, use a rubber mallet, as it will give the stone the desired level.
Take advantage of unhelpful pieces of stone and use them as a barrier between stone and stone, to give separation between pieces for the sticky adhesive to dry.
7. Use the mortar to fill in the spacers between the stones
To do this, try not to make the dough too liquid and for this not to happen, add enough water to be able to knead.
This way we will get a rustic and sandy finish .
8. Removal of joint slurry residue
To do this, use a clean sponge together. But you should wait until the mortar is completely dry. Wet the sponge with water in a bucket and remove the slurry residue.
9. Remove mortar stains on stones
Use a cement remover for this, dilute it with water if the manufacturer’s instructions require it.
Get a hard-bristle brush to clean the stone from mortar residue that could not previously be removed with a sponge.
10. Application of facade waterproofing on stones
This is very important as it will help prevent future stains, algae and fungi from forming due to moisture. It can be applied with brush or spray gun.
